They’re set to report half full on yellow and low on red, but yellow triggers below 3atm and red below 1atm
This means that you can have a tank that is 31% full and still reports full, or a tank that’s 11% full and reports half full
This is kind of bad when power generation depends on how much gas is in the tank, I suspect a singulo nearly loosed on me due to this recently because the SMES were draining while the rad collectors were in the green, until I decided to check the tanks manually anyway and saw that they were close to 300kPa despite reporting full when examining the collector (which was a me skill issue I know but still, it feels wrong)
2 Likes
I’ve actually mentioned this more than once in the discord and will tell people that they need to check it regardless of the colour its projecting. It is very unintuitive.
3 Likes
There is something else that displays incorrectly but I cannot for the life of me remember what it is, something else that was related to power and required a shift click to see accurately. Additionally, I know the AME will occasionally be yellow when everything is working as it should and as efficiently as it should.
(post deleted by author)
Tbh, it’s any power. I think the most accurate readings is just by using a multitool on the HV. But TEG requires a shift click and is finicky because it won’t ever reach “full power” if there’s another main power source in use. It seems to also have a purposeful animation.
I think the shield gens can be a bit weird with how they show their charge also(yes they have a little blue bar to indicate it).
Tesla coils actuall do start to show real cracks but only when it’s “severe” cracks.
Thanks for reporting this. I made a quick PR to adjust the warning light thresholds.
5 Likes
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.